Light Dimmer Intro Rotary Knob 3-100VA, 420 White
89,90 € sis. ALV 24%
- Ensto laatua
Light Dimmer Ensto Intro Rotary Knob 3-100VA, 420 White
Ensto Intro rotary knob dimmer with side control connection 3-100W LED, 20-420VA RCL, white cover plate and rotary knob. Intended for light source coupling and dimming.
Recognizes automatically the light source load and determines the dimming mode accordingly. Operates on Leading Edge or Trailing Edge configuration. Manual adjustment configuration is also possible. Works without the N wire with 230 V LEDs and compact fluorescent tubes. Other light source types require 50 W minimum load to be able to use without N wire. Smooth light up. Lights turn on either on the previous brightness level set or a saved setting. When lights are turned on the brightness level can be saved. Minimum brightness level can be saved. Electronic fault protection with a lasting off switch after max. 7 seconds. Electronic overheat protection. Load threshold can be increased with a separate power source.
Allowed loads (25C):
Dimmable LEDs (230 V) 3…100 W, Light bulbs 20…420 W, Halogen lamps (230 V) 20…420 W, Electronic transformers 20…420 W, Electronic transformers for low-voltage LEDs typically 20…100 W, Inductive transformers 20…420 VA, Inductive transformers for low-voltage LEDs typically 20…100 VA, Dimmable fluorescent tubes typically 3…100 W.
The dimmer is parallel-controllable with a side controller or a push switch. Screw connectors. Supply cable max. length 100 m. Stand-by consumption ca. 0,35 W, Wastage ca. 4 W. Ambient temperature -5 … +45C.
Contents of the package:
Light dimmer, 1 piece
Center plate, 1 piece
Cover plate, 1 piece
Instruction manual, 1 piece