G4 COB 4000K

CRI80 G4 LED 1.6W 4K Dimmable 12V

(0 customer reviews)
SALE 30%
Was 4,20 
The promotional price is valid for now or while supplies last.
In stock

In stock

SKU: LT-G4COB4K Categories: , Tags: , , , ,


CRI80 G4 LED 1.6W 4K Dimmable 12V

12 Volts G4 COB LED. Dimmable with normal LED dimmers and when installed after triac LED drivers. 1.6 Watts of power and LED operating voltage 12 Volts. In practice it works with 12 Volts LED drivers and 12 Volt battery systems where it is desired to minimize light consumption. The quality of light is good and color is natural white 4000K. The driver is chosen based on the size of the lighting group. So you can choose for example eight of these = 8 x 1.6W = 12.8W and then you will need an LED driver. For example one 20W 12V POSYou can install these in dry and damp locations. IP classification is determined by the light frame. The G4 LED itself does not have water protection. If you have 12 Volt needle pin halogens on the ceiling, you already have wiring for 12 Volts. You only need to choose a required amount of these 12 Volt LED spotlights and a suitable LED driver. Of course there can be more than one driver and group, but for a small group one driver is enough. For dimming you can choose an LED dimmer with a remote controller or for example put a rotary knob dimmer in a flush-mounted box and a triac dimmable LED driver for it.

CRI80 quality

For builders, repairers, renovations


No ultraviolet or infrared radiation

You can chain couple the lights by using for example wago connectors

Tekniset tiedot

Frame White, Black, Brushed steel
Valaisimen mitat 14 mm x 42.6 mm
Asennus G4 needles
Paino 20 g
Teho 1.6 W
LED tyyppi Epistar COB
Valon väri 4000K natural white
Valaisukulma 360°
Värintoistoindeksi CRI Ra 80+
Suojausluokka IP20
Käyttöympäristö -20°...+40°C
Takuu 24 months
Sertifikaatti CE



There are no reviews yet.

Show reviews in all languages (3)

Be the first to review “CRI80 G4 LED 1.6W 4K Dimmable 12V”