RGB CCT COB LED Strip 18W 24V
74.90 €
In stock
Description
RGB CCT COB LED Strip 18W 24V. High quality multicolor and white light from cold to warm and vice versa. This LED strip has it all.
Dotless RGB CCT COB Ledtek multicolor + white LED strip. The quality of light is excellent CRI 90+. This LED strip is extremely suitable for indirect lighting and effect lighting. Convenient 1212 lm/m light output. This LED strip is both multicolor and white light adjustable with which you can create dotless lighting. Typically people have experienced the dottiness of LED strips to be a problem. This RGB CCT COB LED strip has 840 small LEDs per meter.
Quality of light matters
Color Rendering Index (CRI) tells you how well different colors are reflected by the light source in comparison to sunlight. Index measured in range 0ā100. Perfect 100 tells that the colors under the light source look the same as they would be under natural sunlight.
High CRI value is important especially in photography, stores, markets, restaurants and other places where colors are required to look as natural and rich as possible. Is there any other more important place than home where a lot of time is spent? It is comfortable to spend time in a high-quality-lit spaces.
Measuring CRI value requires a special type of light tester. We have such a device. CRI of this LED strip is over 90 which means that the quality of light is excellent.
CRI100 = perfect result, CRI over 90 = excellent quality of light, CRI over 80 = good quality of light
Ledtek RGB CCT COB LED Strip
With RGB CCT COB LED strip you can create both multicolor and white lighting. CCT means, that you can adjust white light between cold and warm 2700K – 6500K. In comparison to normal LED strips there is 2 meters of double insulated cable on one end of the reel. It makes iinstallation considerably easier since you do not have to deal with making an extension coupling to 20 cm cable like they have in basic LED strips. The coupling would make quite a lump since there are 6 wires in RGB CCT LED strip. With this LED strip you can hide the connection parts as it should be. RGB CCT COB LED strip can be dimmed the same way as as our other RGB LED strips as long as you have a correct type of controller. RGB CCT controller is a suitable one for RGB CCT strip. Width of this RGB CCT COB LED strip is 12 mm, cut interval 4,2 cm and operating voltage 24 volts. Protection class is IP20, so it is intended for indoor use. You can install it in damp places when you protect the LED strip with an LED aluminum profile + cover + endpieces. Then the possible strain from dampness will remain outside the profile and cover. At cut points there are long copper connection points for soldering and connectors. This RGB COB LED strips has long copper connection points which are better than the shorter ones like some LED strips tend to have. Traditionally, the best coupling is done with soldering. If you use connectors, choose RGB CCT COB LED connectors for this strip 12 mm wide LED strip will not fit inside all LED profiles. For example 1616 corner profile supports max. 10 mm LED strips. Inner groove of 1707 profile is 12,2 mm. Please check technical details of the LED profile to make sure it is suitable for your LED strip.
Applications:
ā¢ LED strip for general lighting
ā¢ LED strip for living room
ā¢ On cabinets for general lighting
ā¢ For lighting profiles
ā¢ Curtain cases
ā¢ Indirect lighting
ā¢ Night clubs
ā¢ Restaurants
ā¢ Shopping malls
Dimmable LED strip
LED RGB CCT COB LED strips are dimmable. In order to enable all properties of this LED strip you will need a correct type of RGB CCT controller. This LED strip is 12 mm wide and it has 6 wires. Suitable controller can be found in our RGB LED Strips category and premium LED Dimmers category.
What do you need for installation?
In addition to LED strip you will need an LED power supply and an RGB CCT controller. To make installation easier there is two meters of cable on one end of the strip In typical LED strips there is only a 20 cm cable on one end of the reel. We have more RGB CCT cable available if you need it. If you use connectors for strips, choose 12mm 6-wire RGB CCT COB connectors.
Usually it is recommended to use aluminum profiles for LED strip installations. This LED strip is IP20, for indoors. You can install it in damp places when you protect the LED strip with an LED aluminum profile + cover + endpieces. Great profile for this strip is for example 1707 aluminum, 1707 white, 1708 black, 2310. Typically the inner groove of LED profiles is 10 mm or 12.2 mm.
24V 150W power supply for 5 meters
24V 100W power supply for 4 meters
24V 50W power supply for 2 meters
Measurement results
Summary, CIE1931 measurement, CIE1976 measurement, CRI measurement, Spectrum measurement
Specifications
KƤyttƶjƤnnite | |
---|---|
Suojausluokka | IP20 |
VƤrilƤmpƶtila (K) | 2700 ā 6500K, RGB |
Valon vƤri | Cool white, Multicolor RGB, Neutral white, Very warm white, Warm white |
VƤrintoistoindeksi | 90+ |
Teho | 18W/meter |
Valovirta | 1212 lumen/meter |
Himmennys | With RGB CCT controller |
LED-valmistaja | Sanāan |
LED-mƤƤrƤ | 840 pcs/meter |
Nauhan leveys | 12 mm |
Nauhan korkeus | 2.2 mm |
KatkaisuvƤli | 4.2 cm |
Rullan pituus | 5 m |
Suositeltu kƤyttƶympƤristƶ | Indoors |
Takuu | 24 months |
Certificate | CE |
Brand | Ledtek |