DALI/Push-dim Dimmable LED Driver 200W 24V

DALI/Push dim dimmable LED driver 200W 24V

POS DALI and PUSH dim dimmable 24V LED driver. It has a convenient 200 Watts of power which is more than enough for a larger LED strip installation. This LED driver is DALI (Digital Addressable Lighting Interface) and PUSH-dim adjustable.

If you want a remote-controlled LED dimmer, you don’t need this driver. In that case, choose a normal LED driver where the dimming takes place after the driver.

This DALI/PUSH dim driver is suitable for example for 24 V DC LED strips, 24 V DC LED downlights, etc. The power is enough for about 14 meters of COB 12W LED strip. The size of this LED driver is 429.5 x 32 x 22.5mm, so this is a so-called slim model. Regarding safety, there is short-circuit protection, overload protection and overheating protection. Of these, the short-circuit and overload protection work on the power cut principle. This means that in a faulty situation, the LED driver starts to cut off the power and it makes the lights flicker. The power cut continues until the fault is removed. The overheating protection cuts off the power from the 24 volt side –> the lights go out. The lights can be turned on by turning the power on again. The protections also work in a similar way in other high-quality LED driver. The driver will cool itself with the air that circulates around it, so ensure there is adequate air flow around the driver.

Compatible devices and controllers:

DALI controllers and other DALI system devices. DALI protocol IEC 62386.

Benefits:

• Flicker-free dimming
• Soft adjustment
• Slim design
• Overload protection
• Overheating protection
• Short-circuit protection
• Full scale dimming 0.1% – 100%
• 10% minimum load
• Safe TUV-CE, RoHS

Applications:

• 24V LED strips
• 24V LED downlights
• 24V LED spotlights
• 24V LED modules
• 24V LED spots