Triac Dimmable POS LED Driver 75W 24V
€42,42 €49,90
Previous lowest price was €42,42.
Description
Triac dimmable LED driver 75W 24V
POS triac dimmable LED driver. It has 75 Watts of power and is sufficient for powering a 24V LED strip in the kitchen, for example. This is Leading edge (RL) and trailing edge (RC) adjustable. Perfect control is achieved, for example, with ABB’s 2-100VA controller. Electrical number 2619376. Other controllers that work with this driver can be found in our light controllers product group.
If you want a remote-controlled LED dimmer, do not choose this driver. For a remote-controlled dimmer, choose a normal LED driver where the dimming takes place after the driver. That is, a driver that does not have triac, Dali or push dim features.
LED driver installation
This 75W 24V triac LED driver is suitable for example for 24 V DC LED strips, 24 V DC LED downlights, etc. The power is enough for a full roll of COB 12W LED strip, for example. The length of this LED driver is 170 mm, height 31 mm and width 56.8 mm. A perfectly sized LED driver. Regarding safety, there is short-circuit protection, overload protection and overheating protection. Of these, the short-circuit and overload protection work on the power cut principle. This means that in a problem situation, the LED driver starts to cut off the power and it makes the lights flicker. The power cut continues until the fault is removed. The overheating protection cuts off the power from the 24 volt side –> the lights go out. The lights can be turned on by turning the power on again. The protections also work in a similar way in other high-quality LED driver. The driver will cool itself with air circulating around it, so install it in a place that has a decent air flow. The driver will not heat up significantly.
Benefits:
- Flicker-free dimming
- Soft adjustment
- Reasonable size
- Overload protection
- Overheating protection
- Short-circuit protection
- Full scale dimming 0% – 100%
- 10% minimum load
- Safe TUV-CE, TUV EMC
Applications:
- 24V LED strips
- 24V LED downlights
- 24V LED spotlights
- 24V LED modules
- 24V LED spots
Specifications
| Operating voltage | |
|---|---|
| Max. power | 75 W |
| Output current | 3.125A |
| Output voltage | 24V DC |
| Power factor | > 0.9 |
| Operating range | ‘-20°C….+45°C |
| Dimensions | 170 x 56.8 x 31mm (L x W x H) |
| Weight | 250 g |
| Safety | Fault protection, Overheat protection, Overload protection, Overvoltage protection |
| IP rating | IP20 |
| Protection class | II |
| Safety standards | EN 61347-1, EN 61347-2-13, Fulfills requirements |
| EMC standards | EN55015, EN55024, EN61000-4-11, EN61000-4-2, EN61000-4-3, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61547, Fulfills requirements |
| Harmonic current | EN61000-3-2 class C ( ≥ 100% load), EN61000-3-3 |
| Warranty | 24 months |
| Certificate | CE |
| Brand | POS |
