RGB CCT LED Strip 19W 12V (Kopio)

RGB CCT LED strip. Natural white light for home and public spaces 3000K / 6000K

Powerful Ledtek multicolor LED strip that has RGB + warm white + cool white LED. Quality of light is CRI 80+ which gives the white color LED a comfortable shine. This LED strip suits perfectly for spaces that require a little more light. Light output 1060 lm/meter. This LED strip has it all. This LED strip has RGB multicolor LEDs, 3000K warm white single color LED and 6000K single color cool white LED.

Quality of light matters

Color Rendering Index (CRI) tells you how well different colors are reflected by the light source in comparison to sunlight. Index measured in range 0–100. Perfect 100 tells that the colors under the light source look the same as they would be under natural sunlight.
High CRI value is important especially in photography, stores, markets, restaurants and other places where colors are required to look as natural and rich as possible. Is there any other more important place than home where a lot of time is spent? It is comfortable to spend time in a high-quality-lit spaces.

Measuring CRI value requires a special type of light tester. We have such a device. The color rendering index (CRI) of this LED strip is over 80 and that means that the quality of light is good.

CRI100 = perfect result, CRI over 90 = excellent quality of light, CRI over 80 = good quality of light

Ledtek RGB CCT LED strip

In addition to multicolor RGB LEDs you get a high quality warm white and cool white light with RGB CCT LED strip. In comparison to normal LED strips we have 1 meter of installation cable on both ends of the 5-meter reel. This helps considerably with installation when you don’t have to make an additional connection with traditional 20 cm long wires. With this LED strip you can hide the connection parts as it should be. RGB WW CW LED strip can be dimmed the same way as our RGB LED strips. The width of this RGB WW CW LED strip is 12 mm, cut points every 5 cm and operating voltage 12 Volts. Protection class is IP20, so it is intended for indoor use. You can install it in damp places when you protect the LED strip with an LED aluminum profile + cover + endpieces. Then the possible strain from dampness will remain outside the profile and cover. At cut points there are long copper points for soldering and connectors. The long copper points of this RGB CCT LED strip are better than those short ones in some normal LED strips.

Applications:

• LED strip for general lighting
• LED strip for living room
• On cabinets for general lighting
• For lighting profiles
• Curtain cases
• Indirect lighting
• Night clubs
• Restaurants
• Shopping malls

Dimmable LED strip

Ledtek RGB WW CW LED strips are dimmable. In order to get all features functioning in this LED strip you will need a correct type of controller. This LED strip is 12 mm wide and it has 6 wires. Suitable controller can be found in our RGB LED strip category.

What do you need for installation?

In addition to LED strip you will need an LED driver and RGB WW CW controller. To make installation easier this LED strip has one meter of cable on both ends of the reel. In typical LED strips there is only a 20 cm cable on one end of the reel. You can cut appropriate lengths from the strip and you have long connection cables at the ready. You don’t necessarily need connectors or soldering. If necessary, choose 12mm 6-conductor connectors.
Usually it is recommended to use aluminum profiles for LED strip installations. This LED strip is IP20, for indoors. You can install it in damp places when you protect the LED strip with an LED aluminum profile + cover + endpieces. A great profile for example 1707 aluminum grey, 1707 white, 1708, black, 2310 slim. The width of this LED strip is 12 mm. Pay attention to this when choosing LED profile. For example 1616 corner profile can fit max. 10 mm LED strip.

Measurement results

Summary, CIE1931 measurement, CIE1976 measurement, CRI measurement, Spectrum measurement

To be added.