POS LED Driver 50W 24V

(0 customer reviews)
31,90  sis. ALV 24%
In stock

In stock


Small-sized 50 Watts 24 V LED Driver.

Suitable for e.g. 24V DC LED strips, 24V DC LED spotlights etc. The height of this LED driver is only 18 mm. Regarding safety it has an overload, fault, overvoltage and overheat protection. Convenient size driver, good screw connectors + strain relief. Easy to install.

This driver cannot be dimmed but you can install a LED dimmer normally between the driver and light source. As is typical in several LED drivers, this one also has a small squeakiness feature when used with an LED dimmer. The noise however is not as significant as in some other models. In fact it is not actually squeakiness (like in many other LED drivers) but a small “electrical sound” can be heard when the power has been set to about 80%. You will have to go next to the driver to hear it. If you install the driver somewhere far like on the ceiling paneling or on the cupboard you will not hear anything. If you don’t install an LED dimmer, the driver remains silent and you won’t have to think about squeakiness at all.

Benefits: small size, cheap, carefree


Other info:

  • Screw connectors
  • Coupling with 0.75 mm² wires
  • Safe to use with no load.

Tekniset tiedot

Käyttöjännite 200-240V AC
Maksimi teho 50 W
Lähtövirta 2.08 A
Lähtöjännite 24V DC
Tehokerroin > 0.9
Käyttöympäristö -20°C....+45°C
Mitat Length 160, width 58, height 18 mm
Paino 160 g
Turvallisuus EN 61347-2-13, Fault protection, Fulfills requirements EN 61347-1, Overheat protection, Overload protection, Overvoltage protection
IP-luokitus IP20
Suojausluokka II
EMC -11; EN55024, -3, -4, -5, -6, -8, Fulfills requirements EN55015; EN61547; EN61000-4-2
Harmonic current EN61000-3-3; EN61000-3-2 class C ( ≥ 100% load)
Sertifikaatti CE
Takuu 24 months



There are no reviews yet.

Show reviews in all languages (5)

Be the first to review “POS LED Driver 50W 24V”