RGB COB LED strip 15W 24V – 5 m

RGB COB LED strip 15W 24V. Multicolor light for home and public spaces – 5 meter roll

Dot-free Ledtek RGB COB multi-color LED strip. The light quality is good CRI 90+, but this is not as significant in multi-color LEDs as in white LEDs. This LED strip is excellent for indirect lighting and accent lighting. The light output is a comfortable 800 lm/meter. This is an RGB multi-color LED strip that allows you to create dot-free lighting. A typical problem with LED strips is the perceived dot-like nature of the light. RGB COB LED strips are made with small COB LEDs and this strip has 840 of them/meter.

New lower price! Previously 61.90€/roll, now only 55.90€!

The quality of light matters

The Color Rendering Index (CRI) is a measure of how well colors appear when using a light source compared to sunlight. The index is measured between 0 and 100. A perfect 100 indicates that colors under the light source appear the same as they would in natural sunlight.
A high CRI value is especially important in photography, retail stores, grocery stores, restaurants, and other spaces where colors need to appear natural and rich. What could be more important than your own home that is properly lit, where you spend a lot of time. A well-lit space is a pleasant place to be.

Testing the CRI value requires a special light tester. We have such a device. The color rendering index (CRI) of this LED strip is over 90, which means that the light quality is excellent.

CRI100 = perfect result, CRI over 90 = excellent light quality, CRI over 80 = good light quality

Ledtek RGB COB LED strip

With the RGB COB LED strip you can create RGB multi-color LED lighting. Compared to normal LED strips, we have 2 meters of installation cable at both ends of the 5-meter roll . This makes installation much easier, as you don’t have to start making a connection with the 20 cm connection cable of standard strips. With this LED strip you can make the connection hidden as it should be done. You can dim the RGB COB LED strip in the same way as our other RGB LED strips. The width of this RGB COB LED strip is 10 mm, the cutting distance is 5 cm and the operating voltage is 24 volts. The protection class is IP20, which means this is intended for dry rooms . You can install this in damp rooms when you protect the LED strip with a covered LED aluminum profile + end caps. Then the moisture load remains outside the aluminum profile and the cover. At the cutting points there are long copper adhesions for soldering and connectors. The long coppers of this RGB COB LED strip are better than the short contact surfaces of some normal LED strips. Traditionally, the best connection is made by soldering. If you use connectors, choose RGB COB LED connectors for this strip.

Applications:

• LED strip for general lighting
• LED strip for the living room
• Over cabinets to provide general lighting
• In light channels
• Curtain boxes
• Indirect lighting
• Nightclubs
• Restaurants
• Shopping malls

Dimmable LED strip

Ledtek RGB COB LED strips are dimmable. To get all the features of this LED strip, you need the right RGB controller . This LED strip is 10 mm wide and has 4 wires. You can find a suitable controller in our multi-color LED strips product group and premium LED dimmers product group .

What do you need for installation?

In addition to the LED strip, you will need an LED transformer and an RGB/RGBW/RGBCCT controller . To make installation easier, this LED strip has two meters of wire at both ends of the roll. Standard LED strips only have 20 cm of wire at one end of the roll. You can cut suitable lengths of this LED strip and have long connecting wires ready for both lengths. You do not necessarily need connectors or soldering. If necessary, choose 10 mm 4-wire RGB COB connectors.
LED aluminum profiles are usually also needed for LED strip installations. This LED strip is an IP20 dry room LED strip. You can install this in damp rooms when you protect the LED strip with a covered LED aluminum profile + end caps. Good profiles are, for example, 1708 aluminum , 1708 white , 1708 black , 2310 rectangular . The width of this LED strip is 10 mm. Typically, the inner groove of the LED profile is 10 mm or 12.2 mm, so no problem with this LED strip.