POS LED Driver 30W 24V
€21,90
Description
Small-sized 30 Watts 24 V LED Driver.
Suitable for e.g. 24V DC LED strips, 24V DC LED spotlights etc. The height of this LED driver is only 17 mm. Regarding safety it has fault protection and overload protection.
This driver cannot be dimmed but you can install a LED dimmer normally between the driver and light source. As is typical in several LED drivers, this one also has a small squeakiness feature when used with an LED dimmer. The noise however is not as significant as in some other models. In fact it is not actually squeakiness (like in many other LED drivers) but a small “electrical sound” can be heard when the power has been set to about 80%. You will have to go next to the driver to hear it. If you install the driver somewhere far like on the ceiling paneling or on the cupboard you will not hear anything. If you don’t install an LED dimmer, the driver remains silent and you won’t have to think about squeakiness at all.
Benefits: small size, cheap, carefree
Other info:
- Screw connectors
- Coupling with 0.75 mm² wires
- Safe to use with no load.
Specifications
| Operating voltage | |
|---|---|
| Max. power | 30 W |
| Output current | 1.25 A |
| Output voltage | 24V DC |
| Power factor | > 0.9 |
| Operating range | ‘-20°C….+45°C |
| Dimensions | Length 156, width 50, height 17 mm |
| Weight | 150 g |
| Safety | Fault protection, Overheat protection, Overload protection |
| IP rating | IP20 |
| Protection class | II |
| EMC | -3, -4, -5, -6, -8, ‘-11; EN55024, Fulfills requirements EN61547; EN61000-4-2 |
| EMC standards | EN55024, EN61000-4-11, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, IEC61547 |
| Harmonic current | EN61000-3-2 class C ( ≥ 100% load), EN61000-3-3 |
| Safety standards | EN 61347-1, EN 61347-2-13 |
| Warranty | 24 months |
| Certificate | CE, SELV |
| Brand | POS |
