Mean Well LED-driver 90W 24V
59.90 €
Out of stock
Description
Himmentimien kanssa vinkumaton Mean Well OWA-sarjan 90W 24V LED-muuntaja. IP67 suojaus muuntajan rungolle.
Several LED-drivers have an unpleasant noisiness feature with dimmers. Typically it happens with PWM-dimmers and when power level is at about 80%. The power source starts to emit a high-frequency squeaking noise. This one does not have such a problem. By this kind of dimmer we mean an LED dimmer that is installed after LED-driver. So this driver will not be dimmed but instead the dimming happens after the driver.
You can feel immediately that this is a high quality device. We recommend. This LED-driver does well in wet and also dusty surroundings. Regarding protections this one has it all. Fault, overload, overvoltage and overheat protection. When fault or overload protection is triggered, the LED-driver starts to cut the power output and resumes normal operation when fault has been fixed. In practice this means flickering lights and the flickering will stop when fault has been fixed. Overvoltage and overheat protections work in shut down principle. LED-driver cuts the power and re-powers itself when error has been resolved.
Benefits: No squeakiness, power plug ready, Mean well quality
Round DC plug on the low voltage (DC) side of the LED-driver. Use the plug or cut it off and connect with +/- cables.
Other info:
- Splash water proof LED-driver
- Power plug ready on the AC side.
- Safe to use with no load.
- Idle mode power consumption <0.15W
Specifications
| Käyttöjännite | |
|---|---|
| Maksimi teho | 90 W |
| Lähtövirta | 7.5 A |
| Lähtöjännite | 24V DC |
| Käyttöympäristö | ‘-30°C….+50°C |
| Mitat | 171 x 63 x 37.5mm |
| Paino | 920 g |
| Turvallisuus | Fault protection, Overheat protection, Overload protection, Overvoltage protection |
| IP-luokitus | IP67 |
| Suojausluokka | II |
| Takuu | 24 months |
| Certificate | CE |
