RGB LED strip 14.4W 24V IP20 10m

10 meters long San’an RGB LED strip for indoors. Popular RGB LED strip in our accomplished projects: nightclubs, restaurants, etc.

• For aluminum profiles
• Nightclubs
• Restaurants
• Shopping malls
• Homes
• Indirect mood lighting, etc.
• Curtain cases
• Headboards
• Northern lights walls

In addition to LED strip you will need an LED-driver and an RGB controller for color adjustment. In order to make installations more convenient there are 2 meters of cable on both ends of the strip. You can cut appropriate lengths from the strip and you have connection cables at the ready. You don’t necessarily need connectors or soldering. In case you need some, pick 10mm RGB connectors.

Usually it is recommended to use aluminum profiles for LED strip installations. We recommend installing this LED strip inside an aluminum profile. Aluminum profile is not absolutely necessary as this RGB LED strip will not warm up remarkably. Smoother finish can be achieved with aluminum profiles.

This is a 10 meters long reel, but technically speaking it has the same features as a 5 meter reel. Which means that due voltage drop the brightness of LEDs starts to dim after 5 meters. You could also make a 7-meter-long installation, but the end part might look slightly more dim than the beginning. You will notice the difference if you bring the end part next to the LEDs at the beginning. In typical installations the difference might be difficult to notice however. By supplying power from both ends of the 10 meter strip you will get full brightness for the whole length.