CRI90 LED strip 3000K 4.8W 12V

SKU: LT-3528W912S Categories: , Tags: , , , ,

25,90  sis. ALV 24%

From 3,50 €/month (36 months)
Read more
  • Himmennettävä
  • Suosittu LED-nauha
  • Tunnelmavalaistukseen
  • Erinomainen valon laatu
In stock
Clear
nopea
Nopea
toimitus
paketti
Edulliset
toimituskulut
lippu
Suomalainen
verkkokauppa

Tuotekuvaus

CRI90 LED strip 3000K 4.8W 12V

Are you looking for LED strip for mood lighting? Would it be nice if the quality of an LED strip was excellent? Would it be nice if the light was not dirty-yellow-looking but instead pleasant warm white? What if additionally the LED strip had pre-soldered 2 meter cables on both ends and a proper 2-sided tape on the backside? That LED strip is right here!

You can choose a 2,5-meter LED strip. Then there will be 2 meters of cable on one end of the strip.

Voi can choose a full 5-meter reel and then there will be 2 meters of cable on both ends of the strip.

High CRI LED strip

High Colour Rendering Index (CRI) Ledtek LED strip. CRI +90 and blue light wavelength over 460 nm. When the wavelength of blue light is over 460 nm it means that it will not put strain on eyes unlike lower wavelengths. This LED strip is applicable to locations where “mood lighting” is required. Color of the light is warm white.

  • Mood lighting
  • Indirect lighting
  • For stairs behind the hand railing or steps.
  • Cabinet lighting
  • Curtain cases
  • Drawer lighting

Installing LED strip

In addition to LED strip you will need a 12 volt LED driver and optionally a dimmer. To make things easier with installation, there are 2 meters of cable on both ends of the reel. You can cut appropriate lengths from the strip and you have connection cables at the ready. You don’t necessarily need connectors or soldering. If you need some, pick 8mm connectors.

Here a few recommended LED drivers for this LED strip:

The above mentioned LED drivers have enough power for 5 meters, in other words a full reel. If you plan to connect for example two reels then you will need more power. For 10 meters we recommend for example this GLP 75 Watts pro series driver.

If LED driver does not have a power plug already, it can be attached to it without a problem. Power plugs and other accesories can be found here.

Usually it is recommended to use aluminum profiles for LED strip installations. For this strip it is optional, however, because the strip will not warm up considerably.

Fast and easy to install!

 

On this video we connect LED strip to a LED touch switch/dimmer.

Tekniset tiedot

Käyttöjännite 12 V DC
Himmennys Dimmable with LED dimmers or with a dimmable LED-driver
Suojausluokka IP20
Suositeltu käyttöympäristö Indoors
Värilämpö 3000 K
LED-valmistaja San'an
LED-määrä 60 pcs/m
Teho 4.8 W/m
Valovirta 300 lm/m
Värintoistoindeksi 90+
Nauhan leveys 8 mm
Nauhan korkeus 2.2 mm
Katkaisuväli 5 cm
Rullan pituus 2.5 m, 5 m
Takuu 24 months
Sertifikaatti CE

Tuotearvostelut

Reviews

There are no reviews yet.

Show reviews in all languages (5)

Be the first to review “CRI90 LED strip 3000K 4.8W 12V”

Katso myös

maksutavat