RF Wifi receiver 4x5A

49,90  sis. ALV 24%

From 5,65 €/month (24 months)
Read more
Out of stock

Out of stock

Tuotekuvaus

RF Wifi receiver with 4x5A power. Suitable for single, RGB and CCT LED strip controllers. It is possible to pair max. 8 controllers for 1 receiver. All controllers in this category are suitable. In addition to dimmers you can control this through Wifi with a phone/table app. The app is free for download on App Store and Play Store. The app is called Easylighting.

Dimmers and receivers sold separately.

Flicker-free dimming.

In addition to receiver you will need an LED-driver. If you have a 12 volt LED strip you will need a 12 volt LED-driver.

In this receiver there are four output connections and each has a max power of 5A. Each output works on the same channel. Cannot be programmed to separate channels. When more power is required, make connections in parallel.

 

Contents of the package:

4x5A RF Wifi receiver, 1 piece
English instruction manual, 1 piece

Tekniset tiedot

Käyttöjännite 12-36V DC
Maksimi kuorma 4 x 5 A
Maksimi teho 240W (12V), 480W (24V)
Koko 170x59x29mm
Paino 100 g
Väri White
RF-taajuus, etäisyys 434MHz ISM bandwidth, Over 20 meters in open area
Kytkentä Paired with a controller
Asennus Installed between LED-driver and LED lights (for example LED strip)
Ohjaimien määrä Max. 8 pieces
Suojausluokka IP20
Käyttöympäristö -20°C...50°C
Takuu 2 years
Sertifikaatti CE

Arvostelut

Reviews

There are no reviews yet.

Be the first to review “RF Wifi receiver 4x5A”